jn air compressor

　　Specially designed for the textile, cement, and glass industries——

　　Kaitec 50Hz 0.3Mpa low-pressure screw air compressor

　　When your gas pressure is 0.2-0.5Mpa, using a conventional 0.7Mpa air compressor will cause huge power waste. Choosing a low-pressure screw air compressor can significantly increase the compressed air production under the same motor power, and correspondingly, you can save 20-50% of electricity.

　　If you purchase a machine with a pressure of 0.7Mpa and actually use a pressure of 0.3Mpa, its working process is usually as follows: the screw host first compresses the air to 0.7Mpa, and then reduces the pressure to 0.3Mpa through pressure reducing valves and other means for use. That is to say, you are using a pressure of 0.3Mpa, and you are experiencing a power consumption of 0.7Mpa.

　　It can also be proven from the perspective of exhaust volume:

　　A 132kW, 0.7Mpa screw air compressor should have a displacement of 24m3/min. And using a KHE132kW, 0.3Mpa screw air compressor, its displacement exceeds 37m3/min! The saved electricity costs will allow you to recover your investment in less than a year.

　　According to the user's usage pressure, the internal compression ratio is automatically adjusted to maintain lower specific power (energy efficiency) within the exhaust pressure range of 0.2~0.5Mpa.

　　Using oil pump for forced lubrication

　　Ensure sufficient fuel injection and a good fuel to air ratio at lower exhaust pressures.